Actiontec MWTV2TX User Manual - Page 4

1.2. Minimum System Requirements  HD set top box, gaming console, or computer equipped with HDMI output port  HDTV monitor with HDMI input 1.3. Package Contents Contents in the package are listed below:  (1) Wireless HD Video Transmitter  (1) Wireless HD Video Receiver  (2) Power Adapter  (2) High-speed HDMI 1.4 Cable  (1) IR Blaster Cable (for Transmitter)  (1) IR Receiver Extension Cable (for Receiver)  (1) Velcro mounting pad kit (for Receiver)  Documentation 1.4. Getting To Know MyWirelessTV 2 This section contains a quick overview of MyWirelessTV, including all ports and LEDS on both the MyWirelessTV Transmitter and Receiver. 1.4.1. MyWirelessTV 2 Transmitter The MyWirelessTV 2 Transmitter features six ports (Power, HDMI Input, HDMI Out to TV, IR Transmit, USB, and OTG), one button (SELECT), and two LEDs (LINK and POWER). Transmitter Front Panel  LINK LED. The LINK LED is used to display the state of pairing between the Transmitter and Receiver. If it is blinking or off, the Transmitter is not paired with any Receiver. If it is glowing steadily, it has paired with a Receiver.  POWER LED. The POWER LED is used to display the state of the Transmitter's power. If unlit, the device is off. If lit, the device is on.  SELECT button. The SELECT button is used to pair with a Receiver. This is only required for connecting to another Receiver.  USB port. The USB port is used to connect a USB flash drive to the Transmitter when a 2