Actiontec MWTV2TX User Manual - Page 13

11

3.

Toggle to the desired video mode by pressing the

MENU

button, and press the

SELECT

button to confirm. The selected video mode takes effect immediately.

To return to the

Main Menu

screen, press the

MENU

button to toggle to the

Back

option,

and press the

SELECT

button.

3.1.3. Pairing

Generally, the transmitter and receiver are pre-paired in factory. However, you need to

re-pair the devices after you have reset the receiver.

Follow the procedure below to pair the receiver with the transmitter:

1.

Press the

MENU

button on the receiver to display the

Main Menu

screen.

2.

Toggle to the

Pairing

icon by pressing the

MENU

button, and then press the

SELECT

button to start the pairing process. The TV screen will display the

Pair to Transmitter

screen and a 120-second countdown.

Section	Page
Part I. Introduction	3
1.1. Features	3
1.2. Minimum System Requirements	4
1.3. Package Contents	4
1.4. Getting To Know MyWirelessTV 2	4
1.4.1. MyWirelessTV 2 Transmitter	4
1.4.2. MyWirelessTV 2 Receiver	5
Part II. Connecting MyWirelessTV 2	7
2.1. Typical MyWirelessTV Connection Configuration	7
2.1.1. Transmitter	7
2.1.2. Receiver	8
2.2. Connecting the MyWirelessTV Transmitter	8
2.3. Connecting the MyWirelessTV Receiver	9
2.4. Setting up IR Control	9
2.4.1. Connecting the IR Blaster Cable	9
2.4.2. Connecting the IR Receiver Extension Cable	10
Part III. Configuring MyWirelessTV 2	11
3.1. Graphical User Interface	11
3.1.1. Language	11
3.1.2. Video Mode	12
3.1.3. Pairing	13
3.1.4. Exit	14
3.1.5. System Information	15
3.2. Resetting to Defaults	15
3.3. Updating MyWirelessTV Firmware	15
Appendix I. Troubleshooting	17
FAQs	17

Actiontec MWTV2TX User Manual - Page 13

Pairing, SELECT, Main Menu, Pairing, Pair to Transmitter

Page 13 highlights