Acer Altos S700 User Manual - Page 70
Dual RAID Controller Configuration, Connecting Dual RAID Controllers to a Host System
![]() |
View all Acer Altos S700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
54 Chapter 4 RAID Configurations Dual RAID Controller Configuration In this configuration two RAID Controllers are installed in the enclosures I/O slots. Note: The following configuration procedures refer to connecting the Altos S700 Series directly to the host system. It is also possible to connect the system using a Hub/Switch. Caution: Before working on the enclosure, ensure that anti-static precautions have been taken. The minimum requirement is an anti-static wrist strap and grounding wire. To connect this configuration to a host system, follow this procedure: Connecting Dual RAID Controllers to a Host System Note: This example configuration assumes that the RAID enclosure is being attached to two separate host systems, each containing two HBA's. Other configurations, such as one host with 4 HBA's are also possible. 1 Plug two host cables in to the host connectors of the first RAID controller (one cable into each FC connector). 2 Plug the opposite ends of these cables into the HBA's of the first host system (see Figure 4-7) 3 Plug two host cables in to the host connectors of the second RAID controller (one cable into each FC connector). 4 Plug the opposite ends of these cables into the HBA's of the second host system (see Figure 4-7)
![](/manual_guide/products/acer-computers-altos-s700-user-manual-3221337/70.png)