2013 Yamaha Motorsports Zuma 50F Owners Manual - Page 49
2013 Yamaha Motorsports Zuma 50F Manual
Page 49 highlights
EAU1722A PERIODIC MAINTENANCE AND ADJUSTMENT 1 terial enters the final transmission case. Make sure that no oil gets on the tire or wheel.[EWA11311] Tightening torque: Final transmission oil filler bolt: 23 Nm (2.3 m·kgf, 16.6 ft·lbf) EAU20070 Coolant The coolant level should be checked before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. EAUT1523 1 2 3 4 5 6 7 2 1. Final transmission oil filler bolt 2. Final transmission oil drain bolt 4. Remove the oil filler bolt and drain bolt to drain the oil from the final transmission case. 5. Install the fi nal transmission oil drain bolt, and then tighten it to the specified torque. Tightening torque: Final transmission oil drain bolt: 13 Nm (1.3 m·kgf, 9.4 ft·lbf) Recommended fi nal transmission oil: See page 8-1. Oil quantity: 0.10 L (0.11 US qt, 0.08 Imp.qt) 7. Check the final transmission case for oil leakage. If oil is leaking, check for the cause. To check the coolant level The coolant level should be checked as follows before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. 1. Place the vehicle on the centerstand. TIP ● 6. Refi ll with the specifi ed amount of the recommended fi nal transmission oil, and then install the oil fi ller bolt and tighten it to the specifi ed torque. WARNING! Make sure that no foreign ma6-13 ● The coolant level must be checked on a cold engine since the level varies with engine temperature. Make sure that the vehicle is positioned straight up when checking the coolant level. A slight tilt to the side can result in a false 8 9