2013 Yamaha Motorsports Zuma 50F Owners Manual - Page 48

2013 Yamaha Motorsports Zuma 50F Manual

Get 2013 Yamaha Motorsports Zuma 50F PDF manuals and user guides View all 2013 Yamaha Motorsports Zuma 50F manuals

Page 48 highlights

EAU1722A PERIODIC MAINTENANCE AND ADJUSTMENT 7. Install engine oil drain bolt A, and then tighten both drain bolts to their specified torques. 1 2 3 4 5 6 7 8 9 Tightening torque: Engine oil drain bolt A: 23 Nm (2.3 m·kgf, 16.6 ft·lbf) Engine oil drain bolt B: 32 Nm (3.2 m·kgf, 23.1 ft·lbf) EAUT1561 Recommended engine oil: See page 8-1. Oil change quantity: 0.78 L (0.82 US qt, 0.69 Imp.qt) ECA11670 Final transmission oil The fi nal transmission case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the scooter. In addition, the final transmission oil must be changed as follows at the intervals specified in the periodic maintenance and lubrication chart. 1. Start the engine, warm it up by riding the scooter for several minutes, and then stop the engine. 2. Place the scooter on the centerstand. 3. Place an oil pan under the fi nal transmission case to collect the used oil. 1 NOTICE ● Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher. ● Be sure no foreign material enters the crankcase. 9. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, immediately turn the engine off and check for the cause. 10.Turn the engine off, and then check the oil level and correct it if necessary. 1. Oil filler hole 8. Refill with the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. 6-12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
1
2
3
4
5
6
7
8
9
6-12
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
7. Install engine oil drain bolt A, and
then tighten both drain bolts to
their specified torques.
Tightening torque:
Engine oil drain bolt A:
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
Engine oil drain bolt B:
32 Nm (3.2 m·kgf, 23.1 ft·lbf)
1
1. Oil filler hole
8. Refill with the specified amount of
the recommended engine oil, and
then install and tighten the oil filler
cap.
Recommended engine oil:
See page 8-1.
Oil change quantity:
0.78 L (0.82 US qt, 0.69 Imp.qt)
ECA11670
NOTICE
●
Do not use oils with a diesel
specification of “CD” or oils of
a higher quality than specifi ed.
In addition, do not use oils la-
beled “ENERGY CONSERVING
II” or higher.
●
Be sure no foreign material en-
ters the crankcase.
9. Start the engine, and then let
it idle for several minutes while
checking it for oil leakage. If oil is
leaking, immediately turn the en-
gine off and check for the cause.
10. Turn the engine off, and then
check the oil level and correct it if
necessary.
EAUT1561
Final transmission oil
The fi nal transmission case must be
checked for oil leakage before each
ride. If any leakage is found, have a
Yamaha dealer check and repair the
scooter. In addition, the final transmis-
sion oil must be changed as follows at
the intervals specifi ed in the periodic
maintenance and lubrication chart.
1. Start the engine, warm it up by
riding the scooter for several min-
utes, and then stop the engine.
2. Place the scooter on the center-
stand.
3. Place an oil pan under the fi nal
transmission case to collect the
used oil.