2012 Yamaha Motorsports Venture Lite Owners Manual - Page 61

2012 Yamaha Motorsports Venture Lite Manual

Get 2012 Yamaha Motorsports Venture Lite PDF manuals and user guides View all 2012 Yamaha Motorsports Venture Lite manuals

Page 61 highlights

Periodic maintenance and adjustment G 3 (a) 2 1 4 1. 2. 3. 4. Locknut Throttle lever free play adjusting nut Rubber cover Throttle lever free play Do not rev the engine to the point that the clutch engages. (b) Throttle lever free play: 2.0-3.0 mm (0.08-0.12 in) 4. 5. Tighten the locknut. Slide the rubber cover to its original position. Check the T.O.R.S. for proper operation. 1. Start the engine. TIP Refer to the "Starting the engine" section on page 36. 2. Hold the pivot point of the throttle lever away from the throttle switch by putting your thumb (above) and forefinger (below) between the throttle lever pivot and the engine stop switch housing. While holding the pivot point as described above, squeeze the throttle lever gradually. ESU11851 Checking the throttle lever free play (PZ50VT) Check the throttle lever free play. Throttle lever free play: 2.0-3.0 mm (0.08-0.12 in) Have a Yamaha dealer adjust the free play if necessary. ESU11863 Checking the throttle override system (T.O.R.S.) EWS00352 WARNING When checking the T.O.R.S., take precautions to avoid snowmobile movement which could cause an accident: G Make sure that the throttle lever moves smoothly with the engine off before checking the T.O.R.S. G Make sure that the parking brake is applied. 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Periodic maintenance and adjustment
55
4.
Tighten the locknut.
5.
Slide the rubber cover to its original posi-
tion.
ESU11851
Checking the throttle lever free
play (PZ50VT)
Check the throttle lever free play.
Have a Yamaha dealer adjust the free play if
necessary.
ESU11863
Checking the throttle override
system (T.O.R.S.)
WARNING
EWS00352
When checking the T.O.R.S., take precau-
tions to avoid snowmobile movement
which could cause an accident:
●
Make sure that the throttle lever moves
smoothly with the engine off before
checking the T.O.R.S.
●
Make sure that the parking brake is ap-
plied.
●
Do not rev the engine to the point that
the clutch engages.
Check the T.O.R.S. for proper operation.
1.
Start the engine.
TIP
Refer to the “Starting the engine” section on
page 36.
2.
Hold the pivot point of the throttle lever
away from the throttle switch by putting
your thumb (above) and forefinger (be-
low) between the throttle lever pivot and
the engine stop switch housing.
While holding the pivot point as described
above, squeeze the throttle lever gradu-
ally.
1. Locknut
2.
Throttle lever free play adjusting nut
3.
Rubber cover
4.
Throttle lever free play
Throttle lever free play:
2.0–3.0 mm (0.08–0.12 in)
Throttle lever free play:
2.0–3.0 mm (0.08–0.12 in)
(a)
(b)
1
2
3
4