2012 Yamaha Motorsports Venture Lite Owners Manual - Page 36
2012 Yamaha Motorsports Venture Lite Manual
Page 36 highlights
Control functions PZ50GT / PZ50VT 1 (b) (a) (a) 1. Spring preload adjusting ring 2 3 (b) 1. Spring preload adjusting nut 2. Distance A 3. Locknut PZ50MT TIP (b) The spring preload setting is determined by measuring distance A, shown in the illustration. The longer distance A is, the higher the spring preload; the shorter distance A is, the lower the spring preload. Spring preload setting*: Minimum (soft): 112.5 mm (4.43 in) Standard: 113.5 mm (4.47 in) Maximum (hard): 123.5 mm (4.86 in) * Distance A changes 1.5 mm (0.06 in) with each full turn of the adjusting nut. 3. Tighten the locknut to the specified torque. NOTICE: Always tighten the locknut against the adjusting nut, and then tighten the locknut to the specified torque. [ECS00860] Tightening torque: Locknut: 42 Nm (4.2 m·kgf, 30 ft·lbf) (a) 1. Spring preload adjusting ring Spring preload setting: Minimum (soft): 1 Standard: PZ50GT / PZ50VT 1 PZ50MT 3 Maximum (hard): 5 Center shock absorber (PZ50RT) 1. Loosen the locknut. 2. To increase the spring preload and thereby harden the suspension, turn the adjusting nut in direction (a). To decrease the spring preload and thereby soften the suspension, turn the adjusting nut in direction (b). 30