2012 Yamaha Motorsports FX Nytro M-TX 153 Owners Manual - Page 24
2012 Yamaha Motorsports FX Nytro M-TX 153 Manual
Page 24 highlights
Control functions ESU13032 Shift lever The shift lever is used to put the snowmobile into forward or reverse. Before shifting, wait for the snowmobile to come to a complete stop with the engine idling. Pull the shift lever out, slide it to "FWD" or to "REV" until it stops, and then push it back in. 1. Pull out. 2. Slide to "REV" (reverse). 3. Push in. 1 ECS00072 NOTICE Do not use the shift lever while the snowmobile is moving, otherwise the drive train could be damaged. 1. Shift lever ESU12735 Drive guard EWS00402 WARNING G G 1. Pull out. 2. Slide to "FWD" (forward). 3. Push in. Coming in contact with the rotating Vbelt or clutch parts can cause severe injury or death. Never run the engine with the drive guard removed. Make sure that the drive guard is installed securely before operating the snowmobile to protect against severe injury or death from a broken V-belt or other part should it come off the snowmobile while it is in operation. ECS00830 NOTICE Never run the engine with the V-belt removed. Clutch components can be damaged. The drive guard is designed to protect the Vbelt clutch and V-belt in case parts break or come loose. 18