2011 Yamaha Motorsports Zuma 125 Owners Manual - Page 52

2011 Yamaha Motorsports Zuma 125 Manual

Page 52 highlights

EAU1722A PERIODIC MAINTENANCE AND ADJUSTMENT Cleaning the V-belt case air fi lter element 1 2 3 2. Remove the filter element holder by removing the screw. type to the entire surface of the sponge material, and then squeeze the excess oil out. TIP The air fi lter element should be wet but not dripping. 2 1 1 4 5 6 7 1. V-belt air filter case cover 2. Screw 1. Air filter element Recommended oil: Yamaha foam air fi lter oil or other quality foam air filter oil 1. Remove the V-belt air filter case cover by removing the screws. 1 8 9 2 1. Air filter element holder 2. Screw 3. Pull the air filter element out, and then clean it with solvent. After cleaning, remove the remaining solvent by squeezing the element. WARNING! Use only a dedicated parts cleaning solvent. To avoid the risk of fire or explosion, do not use gasoline or solvents with a low fl ash point.[EWA10431] NOTICE: To avoid damaging the air fi lter element, handle it gently and carefully, and do not twist it.[ECA10521] 4. Apply oil of the recommended 6-15 5. Insert the element into the air filter case. 6. Install the filter element holder by installing the screw. 7. Install the V-belt air fi lter case cover by installing the screws.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

1
2
3
4
5
6
7
8
9
6-15
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
Cleaning the V-belt case air fi lter
element
1
2
1.
V-belt air filter case cover
2. Screw
1. Remove the V-belt air fi
lter case
cover by removing the screws.
1
2
1.
Air filter element holder
2. Screw
2. Remove the fi
lter element holder
by removing the screw.
1
1. Air filter element
3. Pull the air fi
lter element out, and
then clean it with solvent. After
cleaning, remove the remain-
ing solvent by squeezing the
element.
WARNING! Use only a
dedicated parts cleaning sol-
vent. To avoid the risk of fire or
explosion, do not use gasoline
or solvents with a low fl ash
point.
[
EWA10431]
NOTICE:
To avoid damaging
the air fi
lter element, handle
it gently and carefully, and do
not twist it.
[
ECA10521]
4. Apply oil of the recommended
type to the entire surface of
the sponge material, and then
squeeze the excess oil out.
TIP
The air fi
lter element should be wet
but not dripping.
Recommended oil:
Yamaha foam air fi
lter oil or other
quality foam air filter oil
5. Insert the element into the air fi
l-
ter case.
6. Install the fi
lter element holder by
installing the screw.
7.
Install the V-belt air fi
lter case
cover by installing the screws.