2011 Yamaha Motorsports Zuma 125 Owners Manual - Page 49

2011 Yamaha Motorsports Zuma 125 Manual

Get 2011 Yamaha Motorsports Zuma 125 PDF manuals and user guides View all 2011 Yamaha Motorsports Zuma 125 manuals

Page 49 highlights

EAU1722A PERIODIC MAINTENANCE AND ADJUSTMENT 3. Remove the engine oil fi ller cap and the engine oil drain bolt to drain the oil from the crankcase. Tightening torque: Engine oil drain bolt: 20 Nm (2.0 m·kgf, 14.5 ft·lbf) 5. Refi ll with the specifi ed amount of the recommended engine oil, and then install and tighten the oil filler cap. leaking, immediately turn the engine off and check for the cause. 7. Turn the engine off, and then check the oil level and correct it if necessary. 1 2 3 1 1. Oil filler cap Recommended engine oil: See page 8-1. Oil change quantity: 0.85 L (0.90 US qt, 0.75 Imp.qt) ECA11670 4 5 6 7 8 9 4. Install the engine oil drain bolt, and then tighten it to the specified torque. NOTICE ● Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher. ● Be sure no foreign material enters the crankcase. 6. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is 6-12 1 1. Engine oil drain bolt

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
1
2
3
4
5
6
7
8
9
6-12
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
3. Remove the engine oil fi
ller cap
and the engine oil drain bolt to
drain the oil from the crankcase.
1
1. Oil filler cap
4. Install the engine oil drain bolt,
and then tighten it to the specified
torque.
1
1.
Engine oil drain bolt
Tightening torque:
Engine oil drain bolt:
20 Nm (2.0 m·kgf, 14.5 ft·lbf)
5. Refi
ll with the specifi ed amount
of the recommended engine oil,
and then install and tighten the oil
filler cap.
Recommended engine oil:
See page 8-1.
Oil change quantity:
0.85 L (0.90 US qt, 0.75 Imp.qt)
ECA11670
NOTICE
●
Do not use oils with a diesel
specification of “CD” or oils of
a higher quality than specifi ed.
In addition, do not use oils la-
beled “ENERGY CONSERVING
II” or higher.
●
Be sure no foreign material en-
ters the crankcase.
6. Start the engine, and then let
it idle for several minutes while
checking it for oil leakage. If oil is
leaking, immediately turn the en-
gine off and check for the cause.
7. Turn the engine off, and then
check the oil level and correct it if
necessary.