2011 Yamaha Motorsports RS Venture Owners Manual - Page 80

2011 Yamaha Motorsports RS Venture Manual

Page 80 highlights

Periodic maintenance and adjustment 8. 1 Install the headlight unit, making sure to fit the slots on its bottom onto the projections on its stay. 1 1 1. Air filter case cover fastener 2 1. Slot 2. Projection 6. Lift up the air filter element frame and check the air filter element. If there is any snow on the air filter element, remove the element, brush off the snow, and then install the air filter element. 9. Fit the weatherstrip on the headlight unit into the recess in the top of the air filter case cover. 1 1. Air filter element frame 1 1. Weatherstrip 10. Install the headlight unit bolts, and then tighten them to the specified torque. Tightening torque: Headlight unit bolt: 3.0 Nm (0.30 m·kgf, 2.2 ft·lbf) 11. Install the top cover, the left and right side covers, and the shroud. 7. Place the air filter element frame in the original position, and then install the air filter case cover by hooking the fasteners. RST90 1. 2. Place the snowmobile on a level surface and apply the parking brake. Open the shroud. 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

Periodic maintenance and adjustment
74
6.
Lift up the air filter element frame and
check the air filter element. If there is any
snow on the air filter element, remove the
element, brush off the snow, and then in-
stall the air filter element.
7.
Place the air filter element frame in the
original position, and then install the air
filter case cover by hooking the fasteners.
8.
Install the headlight unit, making sure to
fit the slots on its bottom onto the projec-
tions on its stay.
9.
Fit the weatherstrip on the headlight unit
into the recess in the top of the air filter
case cover.
10. Install the headlight unit bolts, and then
tighten them to the specified torque.
11.
Install the top cover, the left and right side
covers, and the shroud.
RST90
1.
Place the snowmobile on a level surface
and apply the parking brake.
2.
Open the shroud.
1.
Air filter case cover fastener
1.
Air filter element frame
1
1
1
1. Slot
2. Projection
1. Weatherstrip
Tightening torque:
Headlight unit bolt:
3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
1
2
1