2011 Yamaha Motorsports RS Venture Owners Manual - Page 119

2011 Yamaha Motorsports RS Venture Manual

Get 2011 Yamaha Motorsports RS Venture PDF manuals and user guides View all 2011 Yamaha Motorsports RS Venture manuals

Page 119 highlights

Periodic maintenance and adjustment 15. Fit the weatherstrip on the headlight unit into the recess in the top of the air filter case cover. 1. Air filter case fastener 4. Loosen the joint clamp screws. 1 1. Weatherstrip 16. Install the headlight unit bolts and windshield stay bolts (RST90GT), and then tighten them to their specified torques. Tightening torques: Headlight unit bolt: 3.0 Nm (0.30 m·kgf, 2.2 ft·lbf) Windshield stay bolt: 14 Nm (1.4 m·kgf, 10 ft·lbf) 17. Install the top cover, the left and right side covers, and the shroud. 1. Joint clamp screw 5. Slide the oil tank breather hose clamp away from the air filter case, and then disconnect the oil tank breather hose. TIP If the fuse immediately blows again, ask a Yamaha dealer to inspect the snowmobile. RST90 The main fuse is located under the air filter case. The fuse box, which contains the fuses for the individual circuits, is located behind the right side cover. 1. Open the shroud. 2. Remove the right side cover. (See page 63 for removal procedures.) 3. Unhook the air filter case fastener. 1. Oil tank breather hose clamp 2. Oil tank breather hose 6. Slide the crankcase breather hose clamp (crankcase side) up, and then disconnect the crankcase breather hose from the engine. 113

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
Periodic maintenance and adjustment
113
15.
Fit the weatherstrip on the headlight unit
into the recess in the top of the air filter
case cover.
16.
Install the headlight unit bolts and wind-
shield stay bolts (RST90GT), and then
tighten them to their specified torques.
17.
Install the top cover, the left and right side
covers, and the shroud.
TIP
If the fuse immediately blows again, ask a
Yamaha dealer to inspect the snowmobile.
RST90
The main fuse is located under the air filter
case. The fuse box, which contains the fuses
for the individual circuits, is located behind the
right side cover.
1.
Open the shroud.
2.
Remove the right side cover. (See page
63 for removal procedures.)
3.
Unhook the air filter case fastener.
4.
Loosen the joint clamp screws.
5.
Slide the oil tank breather hose clamp
away from the air filter case, and then dis-
connect the oil tank breather hose.
6.
Slide the crankcase breather hose clamp
(crankcase side) up, and then disconnect
the crankcase breather hose from the en-
gine.
1. Weatherstrip
Tightening torques:
Headlight unit bolt:
3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
Windshield stay bolt:
14 Nm (1.4 m·kgf, 10 ft·lbf)
1
1.
Air filter case fastener
1.
Joint clamp screw
1.
Oil tank breather hose clamp
2.
Oil tank breather hose