2011 Yamaha Motorsports Grizzly 700 4x4 EPS SE Owners Manual - Page 145
2011 Yamaha Motorsports Grizzly 700 4x4 EPS SE Manual
Page 145 highlights
EBU25701 Installing a wheel 1. Place the ATV on a level surface. 2. Install the wheel and the nuts. TIP G The arrow mark on the tire must point toward the rotating direction of the wheel. G Tapered nuts are used for both the front and rear wheels. Install the nuts with their tapered side towards the wheel. 1 1. Tapered nut 1 3. Lower the ATV to the ground. 4. Tighten the wheel nuts to the specified torques. Tightening torques: Front wheel nut: 55 Nm (5.5 m·kgf, 40 ft·lbf) Rear wheel nut: 55 Nm (5.5 m·kgf, 40 ft·lbf) 8 1. Arrow mark 8-65
8-65
8
EBU25701
Installing a wheel
1.
Place the ATV on a level surface.
2.
Install the wheel and the nuts.
TIP
●
The arrow mark
on the tire must point toward
the rotating direction of the wheel.
●
Tapered nuts are used for both the front and rear
wheels. Install the nuts with their tapered side to-
wards the wheel.
3.
Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified
torques.
1.
Arrow mark
1
1.
Tapered nut
Tightening torques:
Front wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
1