2011 Yamaha Motorsports Grizzly 700 4x4 EPS SE Owners Manual - Page 105
2011 Yamaha Motorsports Grizzly 700 4x4 EPS SE Manual
Page 105 highlights
TIP If the engine was started before checking the oil level, be sure to warm up the engine sufficiently, and then wait at least 10 minutes until the oil settles for an accurate reading. 3. Remove panel F. (See page 8-10.) 4. Remove the engine oil dipstick, and then wipe it off with a clean rag. TIP The engine oil should be between the minimum and maximum level marks. 1. Maximum level mark 2. Minimum level mark 8 1. Engine oil dipstick 5. Insert the dipstick completely into the oil filler hole, and then remove it again to check the oil level. 6. If the engine oil is at or below the minimum level mark, add sufficient oil of the recommended type to raise it to the correct level. NOTICE: Be sure the engine oil is at the correct level, otherwise engine damage may result. [ECB00851] 7. Insert the dipstick completely into the oil filler hole. 8. Install the panel. 8-25