2011 Yamaha Motorsports Grizzly 700 4x4 EPS SE Owners Manual - Page 111

2011 Yamaha Motorsports Grizzly 700 4x4 EPS SE Manual

Get 2011 Yamaha Motorsports Grizzly 700 4x4 EPS SE PDF manuals and user guides View all 2011 Yamaha Motorsports Grizzly 700 4x4 EPS SE manuals

Page 111 highlights

6. Check the oil level check bolt gasket and the oil filler bolt gasket for damage, and replace them if necessary. 7. Install the oil level check bolt, the oil filler bolt and their gasket, and then tighten the bolts to the specified torques. Tightening torques: Final gear oil level check bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) Final gear oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) 8. Check the final gear case for oil leakage. If oil is leaking, check for the cause. EBU23426 To check the differential gear oil level 1. Place the ATV on a level surface. 2. Remove the differential gear oil filler bolt and its gasket, and then check the oil level in the differential gear case. The oil level should be at the brim of the filler hole. 1 2 3 4 1. 2. 3. 4. Differential gear oil filler bolt Gasket Differential gear oil Correct oil level 8 Differential gear oil The differential gear case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the ATV. In addition, the differential gear oil level must be checked and the oil changed as follows at the intervals specified in the periodic maintenance and lubrication chart. 3. If the oil is below the brim of the filler hole, add sufficient oil of the recommended type to raise it to the correct level. 4. Check the gasket for damage, and replace it if necessary. 8-31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
8-31
8
6.
Check the oil level check bolt gasket and the
oil filler bolt gasket for damage, and replace
them if necessary.
7.
Install the oil level check bolt, the oil filler bolt
and their gasket, and then tighten the bolts to
the specified torques.
8.
Check the final gear case for oil leakage. If oil
is leaking, check for the cause.
EBU23426
Differential gear oil
The differential gear case must be checked for oil
leakage before each ride. If any leakage is found,
have a Yamaha dealer check and repair the ATV.
In addition, the differential gear oil level must be
checked and the oil changed as follows at the in-
tervals specified in the periodic maintenance and
lubrication chart.
To check the differential gear oil level
1.
Place the ATV on a level surface.
2.
Remove the differential gear oil filler bolt and
its gasket, and then check the oil level in the
differential gear case. The oil level should be
at the brim of the filler hole.
3.
If the oil is below the brim of the filler hole, add
sufficient oil of the recommended type to raise
it to the correct level.
4.
Check the gasket for damage, and replace it if
necessary.
Tightening torques:
Final gear oil level check bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
1.
Differential gear oil filler bolt
2. Gasket
3.
Differential gear oil
4.
Correct oil level
1
2
3
4