2011 Yamaha Motorsports C3 Owners Manual - Page 54
2011 Yamaha Motorsports C3 Manual
Page 54 highlights
EAU1722A PERIODIC MAINTENANCE AND ADJUSTMENT EAU23093 EAU23113 EAU43631 Checking and lubricating the Checking and lubricating the Lubricating the front and rear cables throttle grip and cable brake levers 1 2 3 4 5 6 7 8 9 The operation of all control cables and the condition of the cables should be checked before each ride, and the cables and cable ends should be lubricated if necessary. If a cable is damaged or does not move smoothly, have a Yamaha dealer check or replace it. WARNING! Damage to the outer housing of cables may result in internal rusting and cause interference with cable movement. Replace damaged cables as soon as possible to prevent unsafe conditions.[EWA10711] Recommended lubricant: Yamaha Chain and Cable Lube or engine oil The operation of the throttle grip should be checked before each ride. In addition, the cable should be lubricated by a Yamaha dealer at the intervals specified in the periodic maintenance chart. The throttle cable is equipped with a rubber boot. Make sure that the boot is securely installed. Even though the boot is installed correctly, it does not completely protect the cable from water entry. Therefore, use care not to pour water directly onto the boot or cable when washing the vehicle. If the cable or boot becomes dirty, wipe clean with a moist cloth. The pivoting points of the front and rear brake levers must be lubricated at the intervals specified in the periodic maintenance and lubrication chart. Recommended lubricant: Lithium-soap-based grease 6-19