2011 Yamaha Motorsports C3 Owners Manual - Page 34

2011 Yamaha Motorsports C3 Manual

Page 34 highlights

EAU15943 OPERATION AND IMPORTANT RIDING POINTS EAU16830 Engine break-in 1 2 3 4 5 6 7 8 9 There is never a more important period in the life of your engine than the period between 0 and 1000 km (600 mi). For this reason, you should read the following material carefully. Since the engine is brand new, do not put an excessive load on it for the first 1000 km (600 mi). The various parts in the engine wear and polish themselves to the correct operating clearances. During this period, prolonged full-throttle operation or any condition that might result in engine overheating must be avoided. EAU16951 150 ~ 500 km (90 ~ 300 mi) Avoid prolonged operation above 1/2 throttle. Rev the engine freely through the gears, but do not use full throttle at any time. 500 ~ 1000 km (300 ~ 600 mi) Avoid prolonged operation above 3/4 throttle. NOTICE: After 1000 km (600 mi) of operation, the engine oil must be changed and the oil strainer cleaned.[ECA10351] 1000 km (600 mi) and beyond Avoid prolonged full-throttle operation. Vary the speed occasionally. ECA10270 EAU17213 Parking When parking, stop the engine, and then remove the key from the main switch. 0 ~ 150 km (0 ~ 90 mi) Avoid prolonged operation above 1/3 throttle. After every hour of operation, stop the engine, and then let it cool for five to ten minutes. Vary the engine speed from time to time. Do not operate the engine at one set throttle position. NOTICE If any engine trouble should occur during the engine break-in period, immediately have a Yamaha dealer check the vehicle. ZAUM00** EWA10311 ● WARNING Since the engine and exhaust system can become very hot, park in a place where pedestri- 5-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86

1
2
3
4
5
6
7
8
9
5-3
EAU15943
OPERATION AND IMPORTANT RIDING POINTS
EAU16830
Engine break-in
There is never a more important pe-
riod in the life of your engine than the
period between 0 and 1000 km (600
mi). For this reason, you should read
the following material carefully.
Since the engine is brand new, do not
put an excessive load on it for the first
1000 km (600 mi). The various parts
in the engine wear and polish them-
selves to the correct operating clear-
ances. During this period, prolonged
full-throttle operation or any condition
that might result in engine overheating
must be avoided.
EAU16951
0 ~ 150 km (0 ~ 90 mi)
Avoid prolonged operation above 1/3
throttle.
After every hour of operation, stop the
engine, and then let it cool for fi ve to
ten minutes.
Vary the engine speed from time to
time. Do not operate the engine at one
set throttle position.
150 ~ 500 km (90 ~ 300 mi)
Avoid prolonged operation above 1/2
throttle.
Rev the engine freely through the
gears, but do not use full throttle at
any time.
500 ~ 1000 km (300 ~ 600 mi)
Avoid prolonged operation above
3/4 throttle.
NOTICE:
After 1000 km
(600 mi) of operation, the engine oil
must be changed and the oil strain-
er cleaned.
[ECA10351]
1000 km (600 mi) and beyond
Avoid prolonged full-throttle operation.
Vary the speed occasionally.
ECA10270
NOTICE
If any engine trouble should occur
during the engine break-in period,
immediately have a Yamaha dealer
check the vehicle.
EAU17213
Parking
When parking, stop the engine, and
then remove the key from the main
switch.
ZAUM00**
EWA10311
WARNING
Since the engine and exhaust
system can become very hot,
park in a place where pedestri-