2011 Yamaha Motorsports Big Bear 400 4x4 IRS Owners Manual - Page 127

2011 Yamaha Motorsports Big Bear 400 4x4 IRS Manual

Get 2011 Yamaha Motorsports Big Bear 400 4x4 IRS PDF manuals and user guides View all 2011 Yamaha Motorsports Big Bear 400 4x4 IRS manuals

Page 127 highlights

6. Remove the burnt-out bulb by pulling it out. 7. Insert a new headlight bulb into the bulb holder. NOTICE: Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the luminosity of the bulb, and the bulb life will be adversely affected. Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. [ECB00651] 9. Install the bulb holder cover. NOTICE: Make sure the headlight bulb holder cover is securely fitted over the bulb holder and seated properly. [ECB00671] 10. Install the headlight unit cover by installing the screws. 11. Place the headlight assembly in the original position, and then install the screws. 12. Connect the coupler which was disconnected in step "1". 13. Adjust the headlight beam. (See page 8-47.) EBU25551 Adjusting a headlight beam ECB00690 NOTICE It is advisable to have a Yamaha dealer make this adjustment. To raise a headlight beam, turn the headlight beam adjusting screw in direction (a). To lower a headlight beam, turn the adjusting screw in direction (b). 8 1. Do not touch the glass part of the bulb. 8. Install the bulb holder by pushing it in and turning it clockwise. 8-47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
8-47
8
6.
Remove the burnt-out bulb by pulling it out.
7.
Insert a new headlight bulb into the bulb hold-
er.
NOTICE:
Do not touch the glass part of
the headlight bulb to keep it free from oil,
otherwise the transparency of the glass,
the luminosity of the bulb, and the bulb life
will be adversely affected. Thoroughly
clean off any dirt and fingerprints on the
headlight bulb using a cloth moistened
with alcohol or thinner.
[ECB00651]
8.
Install the bulb holder by pushing it in and turn-
ing it clockwise.
9.
Install the bulb holder cover.
NOTICE:
Make
sure the headlight bulb holder cover is se-
curely fitted over the bulb holder and seat-
ed properly.
[ECB00671]
10.
Install the headlight unit cover by installing the
screws.
11. Place the headlight assembly in the original
position, and then install the screws.
12.
Connect the coupler which was disconnected
in step “1”.
13.
Adjust the headlight beam. (See page 8-47.)
EBU25551
Adjusting a headlight beam
NOTICE
ECB00690
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the headlight beam
adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).
1.
Do not touch the glass part of the bulb.