2010 Yamaha Motorsports V Star 1300 Tourer Owners Manual - Page 32
2010 Yamaha Motorsports V Star 1300 Tourer Manual
Page 32 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU42545 Adjusting the shock absorber assembly This shock absorber assembly is equipped with a spring preload adjusting ring, allowing the spring preload to be adjusted to suit the rider's preference. It is recommended to have a Yamaha dealer adjust the spring preload. G Should you choose to make the adjustment, use the special wrench included in the additional tool kit, which was handed out separately at the purchase of the vehicle. ECA10101 4 To close a sidebag lid 1. Fold the sidebag lid down so that the latch snaps into place. 2. Turn the key clockwise, and then remove it. TIP Water can be harmful to untreated leather. Use Yamaha Saddle Soap or another quality brand according to the manufacturer's directions to clean the leather on the sidebags. Polish the dry leather with a soft cloth, and then treat with Yamaha Mink Oil or another highquality leather protectant for increased water resistance. 1. Shock absorber assembly 2. Position indicator 3. Spring preload adjusting ring NOTICE To avoid damaging the mechanism, do not attempt to turn beyond the maximum or minimum settings. Adjust the spring preload as follows. To increase the spring preload and thereby harden the suspension, turn the adjusting ring in direction (a). To decrease the spring preload and thereby soften the suspension, turn the adjusting ring in direction (b). 4-15 TIP Align the appropriate notch in the adjusting ring with the position indicator on the shock absorber. Spring preload setting: Minimum (soft): 1 Standard: 4 Maximum (hard): 9