2010 Yamaha Motorsports V Star 1300 Tourer Owners Manual - Page 23
2010 Yamaha Motorsports V Star 1300 Tourer Manual
Page 23 highlights
INSTRUMENT AND CONTROL FUNCTIONS tomatically, and the display will return to the prior mode after refueling and traveling 5 km (3 mi). 5. Push the " " or " " side of the "SELECT" switch to set the minutes. 6. Push the "RESET" switch and then release it to start the clock. Self-diagnosis device If the odometer/tripmeter/clock display indicates any error codes, note the code number, and then have a Yamaha dealer check the vehicle. ECA11590 To set the clock: NOTICE If the display indicates an error code, the vehicle should be checked as soon as possible in order to avoid engine damage. 4 Brightness control mode 1 1. Clock 1. Push the " " or " " side of the "SELECT" switch to change the display to the clock mode. 2. Push the " " side of the "SELECT" switch and the "RESET" switch together for at least two seconds. 3. When the hour digits start flashing, push the " " or " " side of the "SELECT" switch to set the hours. 4. Push the "RESET" switch, and the minute digits will start flashing. 1. Error code display 1 This model is equipped with a self-diagnosis device for various electrical circuits. If a problem is detected in any of those circuits, the engine trouble warning light will come on and the odometer/tripmeter/clock display will indicate an error code. 2 1. Speedometer panel 2. Brightness level This function allows you to adjust the brightness of the speedometer panel to suit the outside lighting conditions. 4-6
![](/manual_guide/autos/2010-yamaha-motorsports-v-star-1300-tourer-owners-manual-b53927a/23.png)