2010 Yamaha Motorsports Grizzly 450 4x4 Owners Manual - Page 99
2010 Yamaha Motorsports Grizzly 450 4x4 Manual
Page 99 highlights
EBU23328 Engine oil and oil filter cartridge The engine oil level should be checked before each ride. In addition, the oil must be changed and the oil filter cartridge replaced at the intervals specified in the periodic maintenance and lubrication chart. To check the engine oil level 1. Place the ATV on a level surface. 2. Remove panel F. (See page 8-9.) 3. Check the engine oil level on a cold engine. TIP If the engine was started before checking the oil level, be sure to warm up the engine sufficiently, and then wait at least ten minutes until the oil settles for an accurate reading. 4. Remove the engine oil filler cap, and then wipe the engine oil dipstick off with a clean rag. 1. Engine oil filler cap 5. Insert the dipstick into the filler hole (without screwing it in), and then remove it again to check the oil level. TIP The engine oil should be between the minimum and maximum level marks. 8 8-17