2010 Yamaha Motorsports Grizzly 450 4x4 Owners Manual - Page 139
2010 Yamaha Motorsports Grizzly 450 4x4 Manual
Page 139 highlights
7. Install the bulb holder cover and the cover at the rear of the headlight. NOTICE: Make sure the headlight bulb holder cover is securely fitted over the bulb holder and seated properly. [ECB00671] 8. Adjust the headlight beam if necessary. EBU25551 Adjusting a headlight beam ECB00690 NOTICE It is advisable to have a Yamaha dealer make this adjustment. To raise a headlight beam, turn the headlight beam adjusting screw in direction (a). To lower a headlight beam, turn the adjusting screw in direction (b). 1. Headlight beam adjusting screw EBU25621 Replacing the tail/brake light bulb If the tail/brake light bulb burns out, replace it as follows. 1. Remove the tail/brake light assembly by removing the nuts together with the washers. 8 8-57
8-57
8
7.
Install the bulb holder cover and the cover at
the rear of the headlight.
NOTICE:
Make sure
the headlight bulb holder cover is securely
fitted over the bulb holder and seated
properly.
[ECB00671]
8.
Adjust the headlight beam if necessary.
EBU25551
Adjusting a headlight beam
NOTICE
ECB00690
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the headlight beam
adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).
EBU25621
Replacing the tail/brake light bulb
If the tail/brake light bulb burns out, replace it as
follows.
1. Remove the tail/brake light assembly by re-
moving the nuts together with the washers.
1.
Headlight beam adjusting screw