2010 Yamaha Motorsports Grizzly 450 4x4 Owners Manual - Page 137
2010 Yamaha Motorsports Grizzly 450 4x4 Manual
Page 137 highlights
2. Remove the blown fuse, and then install a new fuse of the specified amperage. WARNING! Always use a fuse of the specified rating, and never use a substitute object in place of the proper fuse. An improper fuse or a substitute object can cause damage to the electrical system, which could lead to a fire. [EWB02172] Specified fuses: Main fuse: 30.0 A Headlight fuse: 15.0 A Ignition fuse: 10.0 A Four-wheel-drive motor fuse: 10.0 A Signaling system fuse: 10.0 A Auxiliary DC jack fuse: 10.0 A Backup fuse: 10.0 A 3. Turn the key to "ON" and turn on the electrical circuits to check if the devices operate. 8-55 4. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. EBU25481 Replacing a headlight bulb If a headlight bulb burns out, replace it as follows. 1. Remove the cover at the rear of the headlight by pulling it off. 8 1. Cover at the rear of the headlight 2. Remove the headlight bulb holder cover by pulling it off.