2009 Yamaha Motorsports Zuma 125 Owners Manual - Page 65
2009 Yamaha Motorsports Zuma 125 Manual
Page 65 highlights
Turn signal light bulb, replacing PERIODIC MAINTENANCE AND ADJUSTMENT EAU43040 EAU24204 EAU1722A Tail/brake light 1 Replacing a turn signal light bulb 1. Remove the turn signal light lens by removing the screw. 1 1 2 1 3 1. Turn signal light Bulb 1. Tail/brake light If the tail/brake light does not come on, have a Yamaha dealer check its electrical circuit or replace the bulb. 1. Turn signal light Bulb 2. Remove the burnt-out bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screw. NOTICE: Do not overtighten the screw, otherwise the lens may break.[ECA11191] 4 5 6 7 8 9 6-65 6-28
6-65
1
2
3
4
5
6
7
8
9
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
6-28
Turn signal light bulb, replacing<IXE>
EAU43040
Tail/brake light
1
1.
Tail/brake light
If the tail/brake light does not come on,
have a Yamaha dealer check its electri-
cal circuit or replace the bulb.
EAU24204
Replacing a turn signal light
bulb
1.
Remove the turn signal light lens
by removing the screw.
1
1.
Turn signal light Bulb
1
1.
Turn signal light Bulb
2.
Remove the burnt-out bulb by push-
ing it in and turning it counterclock-
wise.
3.
Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
NOTICE:
Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11191]