2009 Yamaha Motorsports Zuma 125 Owners Manual - Page 51

2009 Yamaha Motorsports Zuma 125 Manual

Page 51 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT Cleaning the V-belt case air filter element 2. Remove the filter element holder by removing the screw. 4. Apply oil of the recommended type to the entire surface of the sponge material, and then squeeze the excess oil out. TIP The air filter element should be wet but not dripping. Recommended oil: Yamaha foam air filter oil or other quality foam air filter oil EAU1722A 1 2 3 4 5 6 7 8 9 2 1 1 1. V-belt air filter case cover 2. Screw 1. Air filter element 1. Remove the V-belt air filter case cover by removing the screws. 1 2 1. Air filter element holder 2. Screw 3. Pull the air filter element out, and then clean it with solvent. After cleaning, remove the remaining solvent by squeezing the element. WARNING! Use only a dedicated parts cleaning solvent. To avoid the risk of fire or explosion, do not use gasoline or solvents with a low flash point.[EWA10431] NOTICE: To avoid damaging the air filter element, handle it gently and carefully, and do not twist it. [ECA10521] 5. Insert the element into the air filter case. 6. Install the filter element holder by installing the screw. 7. Install the V-belt air filter case cover by installing the screws. 6-51 6-14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

6-51
1
2
3
4
5
6
7
8
9
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
6-14
Cleaning the V-belt case air filter
element
1
2
1.
V-belt air filter case cover
2. Screw
1. Remove the V-belt air filter case
cover by removing the screws.
1
2
1.
Air filter element holder
2. Screw
2.
Remove the filter element holder by
removing the screw.
1
1.
Air filter element
3.
Pull the air filter element out, and
then clean it with solvent. After
cleaning, remove the remaining
solvent by squeezing the element.
WARNING! Use only a dedicated
parts cleaning solvent. To avoid
the risk of fire or explosion, do
not use gasoline or solvents with
a low flash point.
[EWA10431]
NOTICE:
To avoid damaging the
air filter element, handle it gen-
tly and carefully, and do not twist
it.
[ECA10521]
4.
Apply oil of the recommended type
to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.
TIP
The air filter element should be wet but
not dripping.
Recommended oil:
Yamaha foam air filter oil or other
quality foam air filter oil
5.
Insert the element into the air filter
case.
6.
Install the filter element holder by
installing the screw.
7.
Install the V-belt air filter case cover
by installing the screws.