2009 Yamaha Motorsports Stratoliner S Owners Manual - Page 66

2009 Yamaha Motorsports Stratoliner S Manual

Get 2009 Yamaha Motorsports Stratoliner S PDF manuals and user guides View all 2009 Yamaha Motorsports Stratoliner S manuals

Page 66 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT EAU22751 EAU23040 Changing the brake and clutch fluids Have a Yamaha dealer change the brake and clutch fluids at the intervals specified in the TIP after the periodic maintenance and lubrication chart. In addition, have the oil seals of the brake and clutch master cylinders and calipers as well as the brake and clutch hoses replaced at the intervals listed below or whenever they are damaged or leaking. G Oil seals: Replace every two years. G Brake and clutch hoses: Replace every four years. 7 Drive belt slack The drive belt slack should be checked and adjusted at the intervals specified in the periodic maintenance and lubrication chart. EAU38410 3. Note the position of the drive belt with a force of 45 N (4.5 kgf, 10 lbf) applied to the belt with a belt tension gauge as shown. TIP A belt tension gauge is available at a Yamaha dealer. To check the drive belt slack 1. Place the vehicle on the sidestand. 2. Note the current position of the drive belt using the marks near the drive belt check hole. TIP The marks near the drive belt check hole are 5.0 mm (0.2 in) apart. 1. Belt tension gauge 4. Calculate the drive belt slack by subtracting the measurement noted in step 2 from the measurement noted in step 3. Drive belt slack: 7.5-13.0 mm (0.30-0.51 in) 1. Drive belt 2. Marks 3. Drive belt slack 7-19 5. If the drive belt slack is incorrect, have a Yamaha dealer adjust it.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
PERIODIC MAINTENANCE AND ADJUSTMENT
7-19
7
EAU22751
Changing the brake and
clutch fluids
Have a Yamaha dealer change the
brake and clutch fluids at the intervals
specified in the TIP after the periodic
maintenance and lubrication chart. In
addition, have the oil seals of the brake
and clutch master cylinders and cali-
pers as well as the brake and clutch
hoses replaced at the intervals listed
below or whenever they are damaged
or leaking.
●
Oil seals: Replace every two
years.
●
Brake and clutch hoses: Replace
every four years.
EAU23040
Drive belt slack
The drive belt slack should be checked
and adjusted at the intervals specified
in the periodic maintenance and lubri-
cation chart.
EAU38410
To check the drive belt slack
1.
Place the vehicle on the sidestand.
2. Note the current position of the
drive belt using the marks near the
drive belt check hole.
TIP
The marks near the drive belt check
hole are 5.0 mm (0.2 in) apart.
3.
Note the position of the drive belt
with a force of 45 N (4.5 kgf, 10 lbf)
applied to the belt with a belt ten-
sion gauge as shown.
TIP
A belt tension gauge is available at a
Yamaha dealer.
4. Calculate the drive belt slack by
subtracting the measurement not-
ed in step 2 from the measurement
noted in step 3.
5.
If the drive belt slack is incorrect,
have a Yamaha dealer adjust it.
1.
Drive belt
2. Marks
3.
Drive belt slack
1.
Belt tension gauge
Drive belt slack:
7.5–13.0 mm (0.30–0.51 in)