2009 Yamaha Motorsports Stratoliner S Owners Manual - Page 30

2009 Yamaha Motorsports Stratoliner S Manual

Page 30 highlights

INSTRUMENT AND CONTROL FUNCTIONS EAU39155 Passenger backrest To remove the backrest 1. Open the sidebag lids. (See page 4-17.) 2. Insert the key into the passenger backrest lock, turn it counterclockwise, and then remove the key. 4 1. Backrest lever 2. Passenger backrest To install the backrest 1. Open the sidebag lids. (See page 4-17.) 2. Fit the slot on each backrest bracket (left and right side) into the groove of its holder. NOTICE: Be careful not to scratch the fender when fitting the slot into the groove. [ECA15372] 1. Key 2. Unlock. 1. Slot 2. Holder 3. Pull the lever on each side of the backrest upward. 4. While holding the levers in the upward position, lift the backrest upward and remove it by pulling it to the rear. 5. Close the sidebag lids. 3. Push the rear of the backrest down smoothly but forcefully to lock it in place and make sure that the lever hook on each side is securely fit over its holder. WARNING! Both lever hooks must be securely fitted over their holder. If the 4-14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

INSTRUMENT AND CONTROL FUNCTIONS
4-14
4
EAU39155
Passenger backrest
To remove the backrest
1.
Open the sidebag lids. (See page
4-17.)
2. Insert the key into the passenger
backrest lock, turn it counterclock-
wise, and then remove the key.
3.
Pull the lever on each side of the
backrest upward.
4.
While holding the levers in the up-
ward position, lift the backrest up-
ward and remove it by pulling it to
the rear.
5.
Close the sidebag lids.
To install the backrest
1.
Open the sidebag lids. (See page
4-17.)
2.
Fit the slot on each backrest brack-
et (left and right side) into the
groove of its holder.
NOTICE:
Be
careful not to scratch the fender
when fitting the slot into the
groove.
[ECA15372]
3.
Push the rear of the backrest down
smoothly but forcefully to lock it in
place and make sure that the lever
hook on each side is securely fit
over its holder.
WARNING! Both
lever hooks must be securely
fitted over their holder. If the
1. Key
2. Unlock.
1.
Backrest lever
2.
Passenger backrest
1. Slot
2. Holder