2009 Yamaha Motorsports Road Star Silverado S Owners Manual - Page 81
2009 Yamaha Motorsports Road Star Silverado S Manual
Page 81 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT EAU24181 EAU24212 Tail/brake light This model is equipped with an LEDtype tail/brake light. If the tail/brake light does not come on, have a Yamaha dealer check it. Replacing a turn signal light bulb 1. Remove the turn signal lens by removing the screws. 1. Headlight bulb holder 1 4. Place a new headlight bulb into position, and then secure it with the bulb holder. 5. Install the headlight bulb cover, and then connect the coupler. 6. Install the headlight unit by installing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. 1. Screw 2. Remove the burnt-out bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. NOTICE: Do not overtighten the screws, otherwise the lens may break. [ECA10681] 7 7-35