2009 Yamaha Motorsports Road Star Silverado S Owners Manual - Page 61
2009 Yamaha Motorsports Road Star Silverado S Manual
Page 61 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT 3. If the oil is below the brim of the check hole, remove the oil filler cap, add sufficient oil of the recommended type to raise it to the correct level, and then install the oil filler cap. To change the transfer case oil 1. Place an oil pan under the transfer case to collect the used oil. 2. Remove the drain bolt and the check bolt to drain the oil from the transfer case. NOTICE: Make sure that no foreign material enters the transfer case. [ECA10871] Recommended transfer case oil: See page 9-1. Oil quantity: 0.40 L (0.42 US qt, 0.35 Imp.qt) 5. Start the engine and let it idle for several minutes while checking the transfer case for oil leakage. If oil is leaking, immediately turn the engine off and check for the cause. 1. 2. 3. 4. Transfer case oil filler cap Transfer case oil level check bolt Correct oil level Transfer case oil 1. Transfer case oil drain bolt 4. Install the oil check bolt, and then tighten it to the specified torque. Tightening torque: Transfer case oil check bolt: 7.5 Nm (0.75 m·kgf, 5.4 ft·lbf) 3. Install the drain bolt and the check bolt, and then tighten the drain bolt to the specified torque. Tightening torque: Transfer case oil drain bolt: 17.5 Nm (1.75 m·kgf, 12.7 ft·lbf) 7 4. Remove the oil filler cap, refill with the specified amount of the recommended transfer case oil, and then install and tighten the oil filler cap. 7-15