2009 Yamaha Motorsports Road Star Silverado S Owners Manual - Page 24
2009 Yamaha Motorsports Road Star Silverado S Manual
Page 24 highlights
INSTRUMENT AND CONTROL FUNCTIONS from that point. In that case, push the " " side of the "SELECT" switch to switch the display between the various tripmeter and odometer modes in the following order: F-TRIP → TRIP A → TRIP B → ODO → F-TRIP TIP Push the " " side of the "SELECT" switch to switch the display in the reverse order. To reset a tripmeter, select it by pushing the " " or " " side of the "SELECT" switch, and then push the "RESET" switch for at least one second. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically, and the display will return to the prior mode after refueling and traveling 5 km (3 mi). Clock 6. Push the "RESET" switch and then release it to start the clock. 1 Self-diagnosis device 1 4 1. Clock The clock displays when the key is turned to "ON". To set the clock 1. Turn the key to "ON". 2. Push the " " side of the "SELECT" switch and "RESET" switch together for at least two seconds. 3. When the hour digits start flashing, push the " " or " " side of the "SELECT" switch to set the hours. 4. Push the "RESET" switch, and the minute digits will start flashing. 5. Push the " " or " " side of the "SELECT" switch to set the minutes. 4-5 1. Error code display This model is equipped with a self-diagnosis device for various electrical circuits. If a problem is detected in any of those circuits, the engine trouble warning light will come on or flash, and then the display will indicate a two-digit error code. If the display indicates any error codes, note the code number, and then have a Yamaha dealer check the vehicle.