2009 Yamaha Motorsports Majesty Owners Manual - Page 61

2009 Yamaha Motorsports Majesty Manual

Get 2009 Yamaha Motorsports Majesty PDF manuals and user guides View all 2009 Yamaha Motorsports Majesty manuals

Page 61 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT EAU20070 1 2 Recommended final transmission oil: See page 9-1. Oil quantity: 0.25 L (0.26 US qt, 0.22 Imp.qt) Coolant The coolant level should be checked before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. EAU34193 7. Check the final transmission case for oil leakage. If oil is leaking, check for the cause. 1. Final transmission oil filler cap 2. Final transmission oil drain bolt 2 3 4 5 6 7 8 9 5. Install the final transmission oil drain bolt, and then tighten it to the specified torque. Tightening torque: Final transmission oil drain bolt: 20 Nm (2.0 m·kgf, 14.5 ft·lbf) To check the coolant level 1. Place the vehicle on a level surface and hold it in an upright position. TIP G G 6. Refill with the specified amount of the recommended final transmission oil, and then install and tighten the oil filler cap. WARNING! Make sure that no foreign material enters the final transmission case. Make sure that no oil gets on the tire or wheel.[EWA11311] The coolant level must be checked on a cold engine since the level varies with engine temperature. Make sure that the vehicle is positioned straight up when checking the coolant level. A slight tilt to the side can result in a false reading. 2. Pull up the right floorboard mat as shown. 7-18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
PERIODIC MAINTENANCE AND ADJUSTMENT
7-18
2
3
4
5
6
7
8
9
5. Install the final transmission oil
drain bolt, and then tighten it to the
specified torque.
6. Refill with the specified amount of
the recommended final transmis-
sion oil, and then install and tighten
the oil filler cap.
WARNING! Make
sure that no foreign material en-
ters the final transmission case.
Make sure that no oil gets on the
tire or wheel.
[EWA11311]
7. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.
EAU20070
Coolant
The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.
EAU34193
To check the coolant level
1. Place the vehicle on a level sur-
face and hold it in an upright posi-
tion.
TIP
±
The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
±
Make sure that the vehicle is posi-
tioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.
2. Pull up the right floorboard mat as
shown.
1. Final transmission oil
fi
ller cap
2. Final transmission oil drain bolt
Tightening torque:
Final transmission oil drain bolt:
20 Nm (2.0 m
·
kgf, 14.5 ft
·
lbf)
2
1
Recommended final transmission
oil:
See page 9-1.
Oil quantity:
0.25 L (0.26 US qt, 0.22 Imp.qt)