2009 Yamaha Motorsports Majesty Owners Manual - Page 24
2009 Yamaha Motorsports Majesty Manual
Page 24 highlights
INSTRUMENT AND CONTROL FUNCTIONS the minute digits will start flashing. 4. Push the "RESET" button to set the minutes. 5. Push the "SELECT" button and then release it to start the clock. Pushing the "SELECT" button for at least two seconds switches the clock display to the ambient temperature display. Ambient temperature display This display shows the ambient temperature from -10 °C (14 °F) to 50 °C (122 °F) in 1 °C or 1 °F increments. The temperature displayed may vary from the ambient temperature. Pushing the "SELECT" button for at least two seconds switches the ambient temperature display to the clock display. TIP G G 1 2 will not be displayed. The accuracy of the temperature reading may be affected when riding slowly (approximately under 20 km/h (12.5 mi/h)) or when stopped at traffic signals, railroad crossings, etc. 1 3 1. Error code display 4 5 6 7 8 9 ECA11790 NOTICE If the multi-function display indicates an error code, the vehicle should be checked as soon as possible in order to avoid engine damage. Clock mode To set the clock: 1. Push the "SELECT" button and "RESET" button together for at least two seconds. 2. When the hour digits start flashing, push the "RESET" button to set the hours. 3. Push the "SELECT" button, and G If the ambient temperature falls below -10 °C (14 °F), a lower temperature than -10 °C (14 °F) will not be displayed. If the ambient temperature climbs above 50 °C (122 °F), a higher temperature than 50 °C (122 °F) 4-6