2009 Yamaha Motorsports Apex LTX Owners Manual - Page 53
2009 Yamaha Motorsports Apex LTX Manual
Page 53 highlights
Periodic maintenance and adjustment 2. Remove the headlight unit bolt on each side of the snowmobile and loosen the quick fastener screws shown on the top cover. 1. Locknut 2. Throttle cable free play adjusting bolt 3. Throttle cable free play 1. Headlight unit bolt Throttle cable free play: 2.0-3.0 mm (0.08-0.12 in) 6. 7. Tighten the locknut. Connect the speedometer coupler and headlight couplers, and then install the headlight unit, making sure to insert the projections on the headlight unit stay into the slots on the bottom of the headlight unit. 1. Quick fastener screw 3. 4. 5. Disconnect the speedometer coupler and headlight couplers, and then remove the headlight unit. Loosen the locknut. Turn the adjusting bolt in or out until the specified throttle cable free play is obtained. 8. Install the headlight unit bolts, and then tighten them to the specified torque. Headlight unit bolt tightening torque: 3 Nm (0.3 m·kgf, 2.2 ft·lbf) 9. Tighten the quick fastener screws on the top cover. 10. Install the shroud. 47