2009 Yamaha Motorsports Apex LTX Owners Manual - Page 33
2009 Yamaha Motorsports Apex LTX Manual
Page 33 highlights
Control functions 1. Locknut 2. Control rod adjuster 3. To increase weight transfer, turn the adjuster in direction (a), and to decrease weight transfer, turn it in direction (b). WARNING! Never adjust the control rod beyond the range of the scale on the special wrench, otherwise the control rod could be damaged, which could lead to an accident or injury. [EWS00181] 4. Tighten the locknut while holding the adjuster in place. NOTICE: Make sure that the special wrench is positioned at a right angle to the control rod, and that it is tightly fitted on the locknut or the control rod adjuster. [ECS00322] Locknut tightening torque: 35 Nm (3.5 m·kgf, 25 ft·lbf) 1. Locknut 2. Control rod adjusting nut 2. RX10RTR / RX10MT EWS00770 To increase weight transfer, turn the adjusting nut in direction (a), and to decrease weight transfer, turn it in direction (b). WARNING! Never adjust the control rods beyond the maximum setting, indicated by red paint; otherwise, they could be damaged, which could lead to an accident or injury. [EWS00173] WARNING The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. 1. Loosen the locknut while holding the adjusting nut. 27