2008 Yamaha Motorsports V Star 250 Owners Manual - Page 61

2008 Yamaha Motorsports V Star 250 Manual

Get 2008 Yamaha Motorsports V Star 250 PDF manuals and user guides View all 2008 Yamaha Motorsports V Star 250 manuals

Page 61 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR Tightening torque: Axle nut: 104 Nm (10.4 m·kgf, 75 ft·lbf) 7. Adjust the brake pedal free play. (See page 6-20.) EWA10660 WARNING After adjusting the brake pedal free play, check the operation of the brake light. 6. Insert a new cotter pin into the axle nut, and then bend its ends as shown. 1. 2. 3. 4. 5. Axle nut Axle nut cotter pin Chain puller locknut Drive chain slack adjusting nut Alignment marks ECA10570 CAUTION: Improper drive chain slack will overload the engine as well as other vital parts of the motorcycle and can lead to chain slippage or breakage. To prevent this from occurring, keep the drive chain slack within the specified limits. 5. Tighten the locknuts, and then tighten the axle nut to the specified torque. 1. Cotter pin 6 NOTE: Make sure that two notches in the axle nut are aligned with the hole through the wheel axle, otherwise further tighten the axle nut until they are. EWA10700 WARNING Always use a new cotter pin for the axle nut. 6-25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
PERIODIC MAINTENANCE AND MINOR REPAIR
6-25
6
CAUTION:
ECA10570
Improper drive chain slack will over-
load the engine as well as other vital
parts of the motorcycle and can lead
to chain slippage or breakage. To
prevent this from occurring, keep
the drive chain slack within the
specified limits.
5. Tighten the locknuts, and then
tighten the axle nut to the specified
torque.
6.
Insert a new cotter pin into the axle
nut, and then bend its ends as
shown.
NOTE:
Make sure that two notches in the axle
nut are aligned with the hole through
the wheel axle, otherwise further tight-
en the axle nut until they are.
WARNING
EWA10700
Always use a new cotter pin for the
axle nut.
7. Adjust the brake pedal free play.
(See page 6-20.)
WARNING
EWA10660
After adjusting the brake pedal free
play, check the operation of the
brake light.
1.
Axle nut
2.
Axle nut cotter pin
3.
Chain puller locknut
4.
Drive chain slack adjusting nut
5.
Alignment marks
Tightening torque:
Axle nut:
104 Nm (10.4 m·kgf, 75 ft·lbf)
1.
Cotter pin