2008 Yamaha Motorsports Phazer R-TX Owners Manual - Page 53
2008 Yamaha Motorsports Phazer R-TX Manual
Page 53 highlights
Periodic maintenance 2. Remove the right upper cover by removing the bolts. 1. Right side cover 2. Quick fastener screw To install the right side cover Place the right side cover in the original position, and then tighten the quick fastener screws. 1. Right upper cover bolt 2. Right upper cover Top cover (PZ50RT / PZ50GT / PZ50MT) To remove the top cover Pull up on the rear of the top cover. To install the right upper cover 1. Place the right upper cover in the original position, and then install and tighten the bolts to the specified torque. Right upper cover bolt tightening torque: 8 Nm (0.8 m·kgf, 5.8 ft·lb) 2. Install the top cover. Left and right upper covers (PZ50VT) To remove an upper cover 1. Open the shroud. (See the above procedure.) 2. Loosen the fasteners, and then remove the upper cover. 1. Top cover To install the top cover Insert the projections on the front of the top cover into the slots in the left and right upper covers, and then fit the projections on the rear of the top cover into the grommets. Right upper cover (PZ50RT / PZ50GT / PZ50MT) To remove the right upper cover 1. Remove the top cover. (See the above procedure.) 1. Fastener 2. Left upper cover 3. Right upper cover 47