2008 Yamaha Motorsports Phazer R-TX Owners Manual - Page 22
2008 Yamaha Motorsports Phazer R-TX Manual
Page 22 highlights
Control functions 1. Warning light " " 2. Self-diagnosis warning indicator " 3. Two-digit error code EWS00650 " 1. Drive select switch 2. Drive "D" indicator light 3. Reverse "R" indicator light ECS00050 WARNING If the self-diagnosis warning indicator and warning light flash continuously, and an error code is displayed during operation, there may be some problem with an electrical circuit, couplers, etc. Note the error code, and then have a Yamaha dealer inspect the snowmobile as soon as possible in order to avoid engine damage. ESU10540 CAUTION: Do not shift from drive to reverse or from reverse to drive while the snowmobile is moving. Otherwise, the drive system could be damaged. ESU10530 Engine stop switch " " The engine stop switch is used to stop the engine in an emergency. Simply push the stop switch to stop the engine. To start the engine, pull the stop switch and proceed with starting the engine. (See pages 33 for engine starting procedures.) Drive select switch The drive select switch is used to shift the snowmobile into drive or reverse. After coming to a complete stop, press the drive select switch. The drive "D" indicator light comes on when the transmission is in drive (forward). The reverse "R" indicator light comes on when the transmission is in reverse. 1. Engine stop switch" " During the first few rides, practice using the stop switch so that you can react quickly in an emergency. 16