2008 Yamaha Motorsports Grizzly 700 4x4 EPS Owners Manual - Page 128

2008 Yamaha Motorsports Grizzly 700 4x4 EPS Manual

Get 2008 Yamaha Motorsports Grizzly 700 4x4 EPS PDF manuals and user guides View all 2008 Yamaha Motorsports Grizzly 700 4x4 EPS manuals

Page 128 highlights

12. Pour the recommended coolant into the reservoir to the maximum level mark, and then install the reservoir cap. Antifreeze/water mixture ratio: 1:1 Recommended antifreeze: High-quality ethylene glycol antifreeze containing corrosion inhibitors for aluminum engines Coolant quantity: Radiator capacity (including all routes): 1.99 L (2.10 US qt) (1.75 Imp.qt) Coolant reservoir capacity (up to the maximum level mark): 0.24 L (0.25 US qt) (0.21 Imp.qt) ECB00401 • If water has been added to the coolant, have a Yamaha dealer check the antifreeze content of the coolant as soon as possible, otherwise the effectiveness of the coolant will be reduced. 13. Loosen the water pump air bleed bolt, without removing it, to allow all of the air to escape from the air bleed bolt hole. CAUTION: • If coolant is not available, use distilled water or soft tap water instead. Do not use hard water or salt water since it is harmful to the engine. • If water has been used instead of coolant, replace it with coolant as soon as possible, otherwise the cooling system will not be protected against frost and corrosion. 8-35 1. Water pump air bleed bolt 14. When coolant begins to flow out of the bolt hole, tighten the water pump air bleed bolt to the specified torque.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
12.
Pour the recommended coolant into the reser-
voir to the maximum level mark, and then in-
stall the reservoir cap.
Antifreeze/water mixture ratio:
1:1
Recommended antifreeze:
High-quality ethylene glycol antifreeze
con-
taining corrosion inhibitors for aluminum en-
gines
Coolant quantity:
Radiator capacity (including all routes):
1.99 L (2.10 US qt) (1.75 Imp.qt)
Coolant reservoir capacity (up to the maxi-
mum level mark):
0.24 L (0.25 US qt) (0.21 Imp.qt)
ECB00401
CAUTION:
•
If coolant is not available, use distilled water
or soft tap water
instead.
Do not use hard wa-
ter or salt water since it is harmful to the en-
gine.
•
If water has been used instead of coolant, re-
place it with coolant as soon as possible,
otherwise the cooling system will not be pro-
tected against frost and corrosion.
•
If water has been added to the coolant, have
a Yamaha dealer check the antifreeze
con-
tent of the coolant as soon as possible,
oth-
erwise the effectiveness of the coolant will
be reduced.
13.
Loosen the water pump air bleed bolt, without
removing it, to allow all of the air to escape
from the air bleed bolt hole.
1.
Water pump air bleed bolt
14.
When coolant begins to flow out of the bolt
hole,
tighten the water pump air bleed bolt to
the specified torque.
8-35