2008 Yamaha Motorsports Grizzly 700 4x4 EPS Owners Manual - Page 124

2008 Yamaha Motorsports Grizzly 700 4x4 EPS Manual

Get 2008 Yamaha Motorsports Grizzly 700 4x4 EPS PDF manuals and user guides View all 2008 Yamaha Motorsports Grizzly 700 4x4 EPS manuals

Page 124 highlights

ECB00410 CAUTION: Be sure no foreign material enters the differential gear case. 6. Install the oil filler bolt, and then tighten it to the specified torque. Tightening torque: Differential gear oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) 7. Check the differential gear case for oil leakage. If oil is leaking, check for the cause. EBU23470 NOTE: The coolant level must be checked on a cold engine since the level varies with engine temperature. 2. Check the coolant level in the coolant reservoir. NOTE: The coolant should be between the minimum and maximum level marks. Coolant The coolant level should be checked before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. EBU27122 To check the coolant level 1. Place the ATV on a level surface. 1. Maximum level mark 2. Minimum level mark 3. If the coolant is at or below the minimum level mark, remove panel D. (See page 8-8.) 8-31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
ECB00410
CAUTION:
Be sure no foreign material enters the differen-
tial gear case.
6. Install the
oil
filler
bolt,
and then tighten it to the
specified torque.
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
7. Check the differential gear case for oil leak-
age.
If oil is leaking, check for the cause.
EBU23470
Coolant
The coolant level should be checked before each
ride.
In addition, the coolant must be changed at
the intervals specified in the periodic maintenance
and lubrication chart.
EBU27122
To check the coolant level
1.
Place the ATV on a level surface.
NOTE:
The coolant level must be checked on a cold en-
gine since the level varies with engine tempera-
ture.
2.
Check the coolant level in the coolant reser-
voir.
NOTE:
The coolant should be between the minimum and
maximum level marks.
1.
Maximum level mark
2.
Minimum level mark
3. If the coolant is at or below the minimum level
mark, remove panel D. (See page 8-8.)
8-31