2008 Yamaha Motorsports Grizzly 700 4x4 EPS Owners Manual - Page 118
2008 Yamaha Motorsports Grizzly 700 4x4 EPS Manual
Page 118 highlights
1. O-ring 1. Torque wrench NOTE: Make sure that the O-ring is properly seated. 8. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque with a torque wrench. Tightening torque: Oil filter cartridge: 17 Nm (1.7 m·kgf, 12 ft·lbf) 9. Install panel G. 10. Install the engine oil drain bolt, and then tighten it to the specified torque. Tightening torque: Engine oil drain bolt: 30 Nm (3.0 m·kgf, 22 ft·lbf) 8-25
1.
O-ring
NOTE:
1.
Torque wrench
Make sure that the
O-ring
is properly seated.
8. Install the new oil filter cartridge with an oil
fil-
ter wrench, and then tighten it to the specified
torque with a torque wrench.
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
9. Install panel G.
10.
Install the engine oil drain bolt, and then tight-
en it to the specified torque.
Tightening torque:
Engine oil drain bolt:
30 Nm (3.0 m·kgf, 22 ft·lbf)
8-25