2008 Yamaha Motorsports Grizzly 350 Auto. 4x4 IRS Owners Manual - Page 22

2008 Yamaha Motorsports Grizzly 350 Auto. 4x4 IRS Manual

Page 22 highlights

If the warning light stays on, allow the engine to cool. If the warning light stays on when the engine is cool, have a Yamaha dealer check the electrical circuit. ECB00010 EBU28341 4 CAUTION: The engine may overheat if the ATV is overloaded. In this case, reduce the load to specification. G Start the engine after making sure that the warning light is out. Continuous use while the warning light is on may cause damage to the engine. G EBU17952 On-Command differential gear lock indicator light " " This indicator light and the On-Command fourwheel-drive indicator light " " come on when the On-Command differential gear lock switch is set to the "LOCK" position. EBU18020 Speedometer The speedometer shows the riding speed. This speedometer is equipped with an odometer and a tripmeter. The tripmeter can be reset to "0" with the reset knob. Use the tripmeter to estimate how far you can ride on a tank of fuel before going to reserve. This information will enable you to plan fuel stops in the future. On-Command four-wheel-drive indicator light " " This indicator light comes on when the On-Command four-wheel-drive switch is set to the "4WD" position. NOTE: Due to the synchronizing mechanism in the differential gear case, the light may not come on until the ATV starts moving. 4-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164

4-3
4
If the warning light stays on, allow the engine to
cool. If the warning light stays on when the engine
is cool, have a Yamaha dealer check the electrical
circuit.
CAUTION:
ECB00010
The engine may overheat if the ATV is over-
loaded. In this case, reduce the load to spec-
ification.
Start the engine after making sure that the
warning light is out. Continuous use while
the warning light is on may cause damage to
the engine.
EBU17952
On-Command four-wheel-drive indicator light
This indicator light comes on when the On-Com-
mand four-wheel-drive switch is set to the “4WD”
position.
NOTE:
Due to the synchronizing mechanism in the differ-
ential gear case, the light may not come on until
the ATV starts moving.
EBU28341
On-Command differential gear lock indicator
light “
This indicator light and the On-Command four-
wheel-drive indicator light “
” come on when the
On-Command differential gear lock switch is set to
the “LOCK” position.
EBU18020
Speedometer
The speedometer shows the riding speed. This
speedometer is equipped with an odometer and a
tripmeter. The tripmeter can be reset to “0” with the
reset knob. Use the tripmeter to estimate how far
you can ride on a tank of fuel before going to re-
serve. This information will enable you to plan fuel
stops in the future.