2008 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 92
2008 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 92 highlights
1 2 3 4 5 6 7 8 9 10 11 NOTE: The sponge material should be wet but not dripping. 10. Pull the sponge material over the air filter element frame. 11. Install the washer and bolt. ECB00450 13. Install the air filter case cover by installing the screws. 14. Install the breather hose and then tighten the clamp screw. 15. Install the seat. CAUTION: Be sure to install the washer with the bent edge facing upward as shown. 1 NOTE: The air filter element should be cleaned every 20- 40 hours. It should be cleaned and lubricated more often if the ATV is operated in extremely dusty areas. Each time the air filter element maintenance is performed, check the air inlet of the air filter case for obstructions. Check the air filter case rubber joint to the carburetor fittings and the rubber joint manifold fittings for an air-tight seal. Tighten all fittings securely to avoid the possibility of unfiltered air entering the engine. ECB00460 CAUTION: G G 1. Washer 12. Install the air filter element into the air filter case. 8-18 Make sure that the air filter element is properly seated in the air filter case. Never operate the engine with the air filter element removed. This will allow unfiltered air to enter the engine, causing rapid engine wear and possible engine damage. Additionally, operation without the air filter element