2008 Yamaha Motorsports FX Nytro RTX Owners Manual - Page 51
2008 Yamaha Motorsports FX Nytro RTX Manual
Page 51 highlights
Periodic maintenance Specified spark plug: Manufacturer: NGK Model: CR9E Spark plugs are produced in several different thread lengths. The thread length or reach is the distance from the spark plug gasket seat to the end of the threaded portion. If the reach is too long, overheating and engine damage may result. If the reach is too short, spark plug fouling and poor performance may result. Also, if the reach is too short, carbon will form on the exposed threads resulting in combustion chamber hot spots and thread damage. Always use a spark plug with the specified reach. Spark plug reach: 19.0 mm (0.75 in) When installing the spark plug, always clean the gasket surface. Wipe off any grime from the threads and tighten the spark plug to the specified torque. Spark plug tightening torque: 12.5 Nm (1.25 m·kgf, 9 ft·lb) ECS00380 CAUTION: Make sure that the spark plug caps are securely installed. Otherwise the spark plug caps could be damaged due to engine vibration. ESU12791 Adjusting the throttle cable free play 1. 2. Loosen the locknut. Turn the adjusting bolt in or out until the specified throttle cable free play is obtained. 1. Spark plug gap 2. Spark plug reach Before installing any spark plug, measure the electrode gap with a wire thickness gauge and adjust to specification. Spark plug gap: 0.7-0.8 mm (0.028-0.031 in) 1. Locknut 2. Throttle cable free play adjusting bolt 3. Throttle cable free play Throttle cable free play: 3.0-4.0 mm (0.12-0.16 in) 3. Tighten the locknut. ESU11861 Checking the throttle override system (T.O.R.S.) Check the T.O.R.S. for proper operation. 45