2008 Yamaha Motorsports FX Nytro RTX Owners Manual - Page 33
2008 Yamaha Motorsports FX Nytro RTX Manual
Page 33 highlights
Control functions To increase the rebound damping force, turn the adjusting dial in direction (a). To decrease the rebound damping force, turn the adjusting dial in direction (b). Rebound damping force setting (rear): Minimum (soft): 20 click(s) in direction (b)* Standard: 11 click(s) in direction (b)* Maximum (hard): 3 click(s) in direction (b)* * With the adjusting dial fully turned lightly in direction (a) ECS00790 CAUTION: G 1. Rebound damping force adjusting dial Rebound damping force setting (center): Minimum (soft): 20 click(s) in direction (b)* Standard: 11 click(s) in direction (b)* Maximum (hard): 3 click(s) in direction (b)* * With the adjusting dial fully turned lightly in direction (a) G G Do not continue to turn the adjusting screw or dial in direction (a) after it stops. The shock absorber can be damaged and damping force adjustments cannot be made. Do not turn the adjusting screw or dial in direction (b) beyond the adjustable range. Even if the adjusting screw or dial is continually turned beyond the adjustable range, there will be no change in the damping force. Be sure to stop the adjusting screw or dial at a position where there is a click. ESU13010 Adjusting the control rods (FX10MT / FX10MTR / FX10MTRA) The weight transfer can be adjusted by turning the control rod adjusting nut. 1. Loosen the locknut while holding the control rod adjusting nut. 2. Turn the control rod adjusting nut in direction (a) to increase weight transfer or direction (b) to decrease weight transfer. 1. Rebound damping force adjusting dial 27