2007 Yamaha Motorsports Nytro Owners Manual - Page 88

2007 Yamaha Motorsports Nytro Manual

Page 88 highlights

E_8gg.book Page 33 Thursday, March 16, 2006 4:23 PM CAUTION: @ The right and left adjusters should be turned to an equal amount. @ 6. Recheck alignment and deflection. If necessary, repeat steps 3 to 5 until the proper adjustment is achieved. 7. Tighten the rear axle nut. Rear axle tightening torque: 75 Nm (7.5 m·kgf, 54.2 ft·lb) ESU02001 Aligning the skis 1. Turn the handlebar so the skis face straight ahead. 2. Check the following for ski alignment: a. Skis are facing forward. b. Ski toe-out (1 - 2) is within specification. Ski toe-out (1 - 2): 0-15 mm (0-0.59 in) 3. If the alignment is not correct, consult a Yamaha dealer. ESU03543 Adjusting the handlebar For RS90R/RS90GT/RSG90/RSG90GT 1. Remove the handlebar cover 1. 8-33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110

8-33
CAUTION
:
@
The right and left adjusters should be turned to an
equal amount.
@
6. Recheck alignment and deflection. If necessary,
repeat steps 3 to 5 until the proper adjustment is
achieved.
7. Tighten the rear axle nut.
ESU02001
Aligning the skis
1. Turn the handlebar so the skis face straight ahead.
2. Check the following for ski alignment:
a.
Skis are facing forward.
b.
Ski toe-out (
1
2
) is within specification.
3. If the alignment is not correct, consult a Yamaha
dealer.
ESU03543
Adjusting the handlebar
For RS90R/RS90GT/RSG90/RSG90GT
1. Remove the handlebar cover
1
.
Rear axle tightening torque:
75 Nm (7.5 m·kgf, 54.2 ft·lb)
Ski toe-out (
1
2
): 0–15 mm (0–0.59 in)
E_8gg.book
Page 33
Thursday, March 16, 2006
4:23 PM