2007 Yamaha Motorsports Grizzly 450 4x4 Owners Manual - Page 147
2007 Yamaha Motorsports Grizzly 450 4x4 Manual
Page 147 highlights
ECB00650 CAUTION: Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the luminosity of the bulb, and the bulb life will be adversely affected. Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. 5. Connect the headlight coupler. 6. Install the headlight bulb holder cover at the rear of the headlight. ECB00670 To raise a headlight beam, turn the adjusting screw in direction (a). To lower a headlight beam, turn the adjusting screw in direction (b). CAUTION: Make sure the headlight bulb holder cover is securely fitted over the bulb holder and seated properly. 7. Adjust the headlight beam if necessary. EBU25550 1. Headlight beam adjusting screw EBU25620 8 Replacing the tail/brake light bulb If the tail/brake light bulb burns out, replace it as follows. 1. Remove the tail/brake light assembly by removing the nuts together with the washers. Adjusting a headlight beam ECB00690 CAUTION: It is advisable to have a Yamaha dealer make this adjustment. 8-54