2007 Yamaha Motorsports Grizzly 450 4x4 Owners Manual - Page 117

2007 Yamaha Motorsports Grizzly 450 4x4 Manual

Get 2007 Yamaha Motorsports Grizzly 450 4x4 PDF manuals and user guides View all 2007 Yamaha Motorsports Grizzly 450 4x4 manuals

Page 117 highlights

To check the differential gear oil level 1. Place the ATV on a level surface. NOTE: The differential gear oil level must be checked on a cold engine. 2. Remove the differential gear oil filler bolt, and then check the oil level in the differential gear case. 3. If the oil is below the brim of the filler hole, add sufficient oil of the recommended type to raise it to the correct level. 4. Install the oil filler bolt, and then tighten it to the specified torque. Tightening torque: Differential gear oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) To change the differential gear oil 1. Place the ATV on a level surface. 2. Place an oil pan under the differential gear case to collect the used oil. 3. Remove the differential gear oil filler bolt and the differential gear oil drain bolt to drain the oil from the differential gear case. 8 1. Differential gear oil 2. Differential gear oil filler bolt 3. Correct oil level NOTE: The oil level should be at the brim of the filler hole. 8-24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
8-24
8
To check the differential gear oil level
1.
Place the ATV on a level surface.
NOTE:
The differential gear oil level must be checked on
a cold engine.
2.
Remove the differential gear oil filler bolt, and
then check the oil level in the differential gear
case.
NOTE:
The oil level should be at the brim of the filler hole.
3.
If the oil is below the brim of the filler hole, add
sufficient oil of the recommended type to raise
it to the correct level.
4.
Install the oil filler bolt, and then tighten it to the
specified torque.
To change the differential gear oil
1.
Place the ATV on a level surface.
2. Place an oil pan under the differential gear
case to collect the used oil.
3.
Remove the differential gear oil filler bolt and
the differential gear oil drain bolt to drain the
oil from the differential gear case.
1.
Differential gear oil
2.
Differential gear oil filler bolt
3.
Correct oil level
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)