2007 Yamaha Motorsports Apex Owners Manual - Page 72
2007 Yamaha Motorsports Apex Manual
Page 72 highlights
E_8fp.book Page 17 Tuesday, March 28, 2006 4:35 PM 1. Remove the shroud and the left side cover. (See pages 8-5-8-7 for removal procedures.) 2. Remove the drive guard. 3. Rotate the secondary sliding sheave clockwise 1 and push 2 it so that it separates from the secondary fixed sheave. 4. Pull 3 the V-belt up over the secondary fixed sheave. 5. Remove the V-belt from the secondary sheave assembly and primary sheave assembly. 6. Temporarily install the new V-belt on the secondary sheave assembly only, and then measure the V-belt position. Do not force the V-belt between the sheaves; the secondary sliding and fixed sheaves must touch each other. Standard V-belt position a: From 1.5 mm (0.06 in) above the edge of the secondary sheave assembly to 0.5 mm (0.02 in) below the edge. 8-17