2007 Yamaha Motorsports Apex RTX Owners Manual - Page 22

E_8gt.book Page 4 Tuesday, March 28, 2006 5:37 PM ESU04711 Speedometer unit The speedometer unit is equipped with the following: G a digital speedometer (which shows the riding speed) G an odometer (which shows the total distance traveled) G two tripmeters (which show the distance traveled since they were last set to zero) G a barometer (which shows the ambient barometric pressure) G a clock G warning indicators (which show self-diagnosis, coolant temperature, fuel level, and oil level warnings) G a fuel meter (which shows the fuel remaining in the fuel tank) G a grip/thumb warmer level indicator (which shows the grip warmer level or the thumb warmer level) G a display brightness control function After the engine is started, the tachometer 1 makes one sweep, and the low coolant temperature indicator light 2, the warning light 3, and all segments of the meter display 4 turn on and off once. The grip warmer level is initially displayed for 5 seconds, then the display switches to the fuel meter. Odometer, tripmeter, and barometer modes Pushing the "SELECT" button 1 switches the display between the odometer mode "ODO", tripmeter modes "TRIP A" and "TRIP B", and barometer mode "BARO". To reset a tripmeter, push the "RESET" button for at least 1 second while the tripmeter is displayed. NOTE: @ G G To switch the speedometer, odometer, and tripmeter displays between kilometers and miles, select the odometer mode "ODO", and then push the "SELECT" button for at least 10 seconds while the snowmobile is stopped. To switch the barometer display between hectopascal "hPa" and inches of mercury "inHg", select the barometer mode "BARO", and then push the "SELECT" button for at least 3 seconds while the snowmobile is stopped. @ 5-4