2005 Yamaha Motorsports SXVenom Owners Manual - Page 62
2005 Yamaha Motorsports SXVenom Manual
Page 62 highlights
Pilot screw adjustment Turn the pilot screw in or out to adjust low speed tuning. Standard pilot screw position: 2.0 turns out from the seated position. CD-02E Pilot screw 1 Mixture Lean Rich Condition Warm weather High altitude Cold weather Low altitude Turn in Turn out Jet needle adjustment Adjust the jet needle by changing its clip position according to the setting chart which is available at a Yamaha dealer. Standard jet needle clip 1 position: 3rd groove from upper end CD-03E Clip position Mixture Lean Rich Condition Warm weather High altitude Cold weather Low altitude 2 Upper end 3 Lower end 1. Remove the top cover of the carburetor and jet needle. 2. Change the clip to the proper position. Make sure that the plastic washer is in place below the clip. WARNING @ Make sure that the throttle outer cable is firmly seated in the holder and the throttle operates smoothly after assembling the carburetor. @ 3. Assemble by reversing the removal steps. 8-8